
SAT Linear or Exponential Growth? Compare Differences and Factors
Increasing does not automatically mean exponential
SAT Math includes comparing linear and exponential growth and interpreting nonlinear relationships. Both models can describe quantities that increase, so the direction of change is not enough. Look at what stays constant over equal time intervals.
A linear model adds the same amount each interval. An exponential model multiplies by the same positive factor each interval. The distinction is between a fixed difference and a fixed ratio, not between a small increase and a large one.
Read a table in equal steps
Suppose a membership total is 80, 100, 120 and 140 at the ends of four consecutive months. The differences are all 20, so a linear model fits these values. Now compare 80, 100, 125 and 156.25. Each value is 1.25 times the previous one, so an exponential model fits.
The second sequence does not add 25 each month. It grows by 25 per cent of the current amount. The increase changes because the base changes. Confirm that the time intervals are equal before comparing differences or factors; a table with months 0, 1, 3 and 6 requires more careful reasoning.
Connect the pattern to the equation
If a quantity begins at 80 when t = 0 and adds 20 each month, write y = 80 + 20t. If it begins at 80 and increases by 25 per cent each month, write y = 80(1.25)^t. The starting value sits outside the power; the growth factor is raised to the number of intervals.
For decay, a 15 per cent reduction each interval gives a factor of 0.85, not 0.15. A starting amount of 200 becomes 170 after one interval and 144.5 after two. Explain each part of the equation in words before manipulating it.
Match the factor to its time unit
A quantity that doubles every three years can be modelled as y = a·2^(t/3) when t measures years and a is the starting amount. The exponent counts three-year periods. Using 2^t would incorrectly double it every year.
On a graph, equal additive changes produce a straight line; repeated multiplicative changes generally produce a curve. A small part of a curve may look nearly straight, so use the equation, table or stated rate when those are available rather than judging a rough picture alone.
Check what the question actually requests
Some questions ask for a model, others for a future value, and others for the meaning of a coefficient or factor. Answer that request. If the question asks for the yearly percentage increase, a factor of 1.08 means 8 per cent, not 108 per cent.
During practice, classify a relationship before calculating. Say “same difference” or “same factor,” identify the interval, and check the initial value. These three decisions prevent many errors that a calculator cannot diagnose for you.



Comments