Why Does a Shadow Change Size? A Torch Investigation at Home
A shadow can grow even when the object casting it does not. That apparent puzzle gives children a useful reason to investigate the positions of a light source, an opaque object and a surface.
Use an ordinary LED torch, a piece of opaque card and a pale wall or card screen. An adult should manage the setup. Do not use lasers, flames or the sun, and never shine the torch into anyone’s eyes. Keep the room safe to move around in rather than making it completely dark.
Establish what makes the shadow
Place the card between the torch and the screen. The card blocks some of the light travelling towards the screen, so a darker region appears behind it. A shadow is not a dark substance coming out of the object.
England’s primary science curriculum includes recognising that opaque objects block light and exploring patterns in shadow size. This activity is one original home investigation of those ideas. The cover is an illustration, not a measured scientific diagram.
Keep the torch and screen in fixed positions
Mark the torch’s position and the screen’s position so they do not drift. Keep the card upright and facing the light in the same way. Begin with the card somewhere between them, where its full shadow fits on the screen.
Ask the child to predict what will happen if the card moves closer to the torch while the screen stays fixed. Invite a reason, but do not present the prediction as something they must defend regardless of the result.
Move only the card towards the torch and observe the shadow. Then move it towards the screen. In this arrangement, bringing the card closer to the torch generally makes its shadow larger; bringing it closer to the screen makes it smaller.
Connect the pattern to the light’s path
The light reaching the screen spreads out from the torch. Near the source, the card blocks a wider spreading bundle of paths that would otherwise reach the screen. Farther towards the screen, the same-sized card blocks a smaller region on that surface.
For an initial explanation, trace two imaginary straight paths from the source past opposite edges of the card to the screen. Do not confuse these paths with visible lines that must actually appear in the air. A sketch can help the child connect the positions to the changing outline.
Real torches are not perfect point sources. Their beams, reflectors and emitting areas can affect the outline and its sharpness. If the result is hard to compare, adjust the setup so the full shadow is visible and use the same torch throughout. Treat an unexpected result as a reason to inspect the arrangement, not to invent measurements.
Record observations without supplying the answers
Choose three card positions and label them nearer the torch, middle and nearer the screen. At each position, draw the shadow or measure its height if the edge is clear enough. Record the actual result. There are no universal measurement values for this activity: they depend on the setup.
If measuring, decide consistently which shadow edges count and keep the card’s orientation unchanged. A larger shadow may extend beyond the screen; that is a limitation to correct, not a complete measurement.
Use a new question to check the explanation
Ask: How could the shadow become larger while the bird-shaped card stays the same size? A useful answer identifies the change in position and its effect on where light is blocked. Simply saying because it is nearer leaves the relevant objects unclear.
Finish by asking what was observed and what explanation fits it. The child does not need sophisticated optical vocabulary to think scientifically. Careful comparison, honest recording and a reason that connects to the evidence are a substantial achievement.



Comments